Constant Volume or Flow Regulators are placed
inside the duct in order to obtain a constant flow
within 15-800 CFM.
Our Cable Damper Systems are designed
to be used when a motorized system is not
practical. The flexible cable and wire can be
routed around electrical conduit, piping and
other obstructions, without fear of binding or
catching. Our Rotary-to-linear (rack & pinion)
mechanical actuator assembly securely holds
the damper in position for precise dependable
settings. Cables can be connected together if a
greater length is required.
AirZoe's access door with tab lock frame is used to access
the inside of rectangular ductwork.
Double paneled with front and back metal plates, and 1”
insulation.
Our Spring Loaded Backdraft Dampers (AZ-BDD)
are available in the spring-loaded and gravity style
backdraft dampers. The spring loaded dampers
are available in 4”, 5”, 6” and 8” models with a
center pin design and a 10” or 12” center post
design.
Barometric Dampers are used to automatically bypass excess air when increases in duct static pressure occur due to closing of zone dampers. Various relief air control setting are easily accomplished by simple adjustment os an integral weighted lever.
Hand Operated Dampers are designed to
be used when a motorized system is not
practical. Our rotary-to-linear (rack and pinion)
mechanical actuator assembly securely holds
the damper in position for precise dependable
settings.
Copyright © 2020 AirZoe - All Rights Reserved.-D-VAC Sales Inc
Powered by GoDaddy